despikes traces
command: DESPIKE <trc-list> <detec> [<lo-t> <hi-t>] [<nsp>] [<ndc>]
Removes spikes from one or more traces specified by <trc-list>. If a time window <lo-t>, <hi-t> is entered the despiking is restricted to this window, otherwise the whole trace is used. A spike is recognized if the difference between two samples is larger than <detec> times the mean difference on the whole trace.
parameters
- <trc-list> parameter type: trace list
List of traces to be despiked.
- <detec> parameter type: real
A spike is detected if the difference between two samples is larger than <detec> times the mean difference.
- <lo-t>, <hi-t> parameter type: real
If specified the spike detection is restricted to this time window given in seconds.
- <nsp> parameter type: symbol address
Receives total number of removed spikes on all input traces.
- <ndc> parameter type: symbol address
Receives total number of detected discontinuties on all input traces.
example
- despike 1-3 100.
- despikes the whole traces 1,2,3 with a factor of 100.
- despike 1 1000. 10. 15.
- despikes traces 1 between 10 sec and 15 sec on time axis
- despike 1 1000. *
- despikes trace 1 within a window which must be selected by graphic cursor
